# BCONVERT not supposed to be part of OEM options

**URL:** <https://forum.techsoft3d.com/t/bconvert-not-supposed-to-be-part-of-oem-options/3737>\
**Category:** AutoCAD OEM\
**Created:** [June 3, 2024, 2:36pm UTC](https://forum.techsoft3d.com/t/bconvert-not-supposed-to-be-part-of-oem-options/3737 "2024-06-03T14:36:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![paavo](https://avatars.discourse-cdn.com/v4/letter/p/b3f665/32.png) [@paavo](https://forum.techsoft3d.com/u/paavo)\
**Post date:** [June 3, 2024, 2:36pm UTC](https://forum.techsoft3d.com/t/bconvert-not-supposed-to-be-part-of-oem-options/3737/1 "2024-06-03T14:36:26Z")

</div>

The newly introduced vanilla AutoCAD 2025 command BCONVERT has been listed as configurable in the MakeWizard set of commands by mistake:

 ![image](https://us1.discourse-cdn.com/flex020/uploads/techsoft3d/original/2X/a/a0c73a393fe79b2e18cbfa4935afd3ed2dfc2b0d.png)

Running the command requires the user to be signed in with your account. Which, as you know, is not a feature in OEM.  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/techsoft3d/original/2X/f/fc239f89ff700d821aeb5d9de1d198de7fed6d7a.png)

You should disable it manually to avoid confusing the end user. In a future SP or release it will be removed.  
The ReadMe file is correct as BCONVERT is stated to be vanilla AutoCAD only:

 ![image](https://us1.discourse-cdn.com/flex020/uploads/techsoft3d/original/2X/4/4fbe624ebdc0c42ca7c3638bb2f460f74e0ccbf5.png)

---

<div class="post-metadata">

**Author:** ![shawn.g](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.techsoft3d.com/shawn.g/32/482_2.png) [@shawn.g](https://forum.techsoft3d.com/u/shawn.g)\
**Post date:** [June 4, 2024, 3:11pm UTC](https://forum.techsoft3d.com/t/bconvert-not-supposed-to-be-part-of-oem-options/3737/2 "2024-06-04T15:11:36Z")

</div>

Paavo,  
Thanks for the heads up!  
Shawn  
Microvellum