# HOOPS 3D Part Viewer to open other design formats

**URL:** <https://forum.techsoft3d.com/t/hoops-3d-part-viewer-to-open-other-design-formats/2698>\
**Category:** HOOPS Exchange\
**Tags:** how-to\
**Created:** [September 28, 2023, 1:51pm UTC](https://forum.techsoft3d.com/t/hoops-3d-part-viewer-to-open-other-design-formats/2698 "2023-09-28T13:51:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![valerij.bielskij](https://avatars.discourse-cdn.com/v4/letter/v/dec6dc/32.png) [@valerij.bielskij](https://forum.techsoft3d.com/u/valerij.bielskij)\
**Post date:** [September 28, 2023, 1:51pm UTC](https://forum.techsoft3d.com/t/hoops-3d-part-viewer-to-open-other-design-formats/2698/1 "2023-09-28T13:51:27Z")

</div>

Hello,

can Part Viewer be used to verify HOOPS Exchange for regressions?  
For ex. we have noticed that textures from at least one of the DWFX files are not imported with version 2023 SP2 while it worked fine with 2021.

Valerij

---

<div class="post-metadata">

**Author:** ![valerij.bielskij](https://avatars.discourse-cdn.com/v4/letter/v/dec6dc/32.png) [@valerij.bielskij](https://forum.techsoft3d.com/u/valerij.bielskij)\
**Post date:** [September 29, 2023, 8:13am UTC](https://forum.techsoft3d.com/t/hoops-3d-part-viewer-to-open-other-design-formats/2698/2 "2023-09-29T08:13:48Z")

</div>

Turns out it’s not a direct issue with DWF format but more generic one with importing png files. I’ve created tech support ticket instead, thanks.