HOOPS Exchange for conversion， warning

HOOPS Communicator
1

639c45d809011fe8eda32888e9859d40
639c45d809011fe8eda32888e9859d40993×519 16.7 KB
Using HOOPS Exchange for conversion, a 1GB CATIA file has been processing for over an hour without finishing. The output messages during the process are shown above, and the conversion parameters are as follows:

converter_path,

‘–input’, '“${abs_path}”:

‘-license’, license_key,

‘-output_sc’, output_sc_path,

‘–output_scs’, output_scs_path,

‘-load_all_configurations’, “0”,

‘-tessellation_quality’, “0”,

‘–sc_export_attributes’, “1”

Please check if there is any issue.

2

A series of WARNINGS is not necessarily indicative of the reason for a failed conversion to Stream Cache file. Note that a 1GB CAD file is on the large side of the spectrum when it comes to file sizes so it’s possible the conversion is still in the processing stage and not “crashed.” Our quick suggestion is to either generate an SC or SCS (but not both) as a way to reduce the total conversion time for the first conversion.